Categories

Categorie
PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti

Multi Camera Adapter module V2.2 for Raspberry Pi 4/3B+/3B

67,10 €
Tasse incluse
Quantità

Items Description:

  • The latest revision of the Arducam Multi Camera Adapter is V2.2. The V2.2 undergoes firmware updates, but the specs, documentations, and tutorials on the V2.1 will still apply to the V2.2.
  • Considering that the high-speed CSI camera MIPI signal integrity is sensitive to a long cable connection, this adapter board does not support stacking and can only connect 4 cameras at maximum. Because It covers most of the use cases like 360-degree view photography and surveillance, adding more cameras will degrading the camera performance.
  • The previous model work with Raspbian 9.8 and backward, and does NOT work with Raspbian 9.9 and onward, so this model is out to tackle this issue.
  • Please note that Raspberry Pi multi-camera adapter board is a nascent product that may have some stability issues and limitations because of the cable’s signal integrity and RPi's closed source video core libraries, so use it at your own risk.

Features:

  • Accommodate 4 Raspberry Pi cameras on a single RPi board
  • Support 5MP OV5647 / 8MP IMX219 / 12MP IMX477 camera, no mixing allowed
  • 3 GPIOs required for multiplexing
  • Cameras work in sequential, not simultaneously
  • Low resolution, low frame rate video surveillance demo with 4 cameras
  • High resolution still image photography demo

Application:

  • IoT cameras
  • Robot cameras
  • Panorama cameras
  • Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms

Package Includes:

  • 1pcs Arducam Mini Multi-Camera Adapter Board for Arduino
  • 1pcs 60mm 15pin FPC cable

Additional Resources:

Blog:

 

Video:

AC-B012001