No products in the cart.
Idee Regalo
-
Buoni Regalo
Offerta Gift Card 20€- 50€- 100€ Regala un buono -
Corsi Arduino-3D Printer
Arduino Micro:Bit Raspberry Robot Marttino
Nuovi prodotti
12MP 477P Pan Tilt Zoom(PTZ) Camera
Overview
Arducam PTZ camera is a complete solution to turn your Raspberry Pi/Jetson Nano/Xavier NX, and it is capable of remote directional and zoom control, so it could move the camera and the lens, which means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera. What’s more, this kit is based on the IR-CUT switchable 13MP camera to get sharp imaging all day and night.
Currently, NVIDIA official has released the NVIDIA Jetson Orin series developer board. Based on it, we have also adapted the camera to the NVIDIA Jetson Orin kernel.
Applications
- IoT cameras
- Robot cameras
- Wildlife cameras
- Cellular phones, PDAs, Toys
- Other security and surveillance projects
Specifications
Optical Size | 1/2.3” |
Pixel Size | 1.55um x 1.55um |
Active Pixels | 12.3MP 4056(H)x3040(V) |
Frame Rates |
Frame Rate(Raspberry Pi): 2028 × 1080p50, 2028 × 1520p40 and 1332 × 990p120 NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin: |
Shutter Type | Rolling Shutter |
Focal Length | 4.38-10.71mm±5% |
F.NO | W:1.6-T:3.3±5% |
Focus Type | Front group: focus Back group: Zoom |
Field of View(FOV) | 96° – 33° (Horizontal) |
IR Sensitivity | Optional with additional Motorized IR-Cut filter |
Dimension | 36mm x 36mm |
Pan and Tilt Range | 0-180° |
Zoom Range (Wide => Tele) | 2317 steps 0.00396mm/step |
Focus Range(Near => Far) | 3009 steps 0.0047mm/step |
Package Including
- 1 x Arducam PTZ Lens, assembled with a 12MP IR-CUT switchable camera board and camera control board
- 1 x 15-Pin to 22-Pin Ribbon Cable (11.8 in/30 cm)
- 1 x 22-Pin Ribbon Cable (11.8 in/30 cm)
- 1 x XH2.54 Jumper wire with 6-Pin Female Connector (11.8 in/30 cm)
Note
- Raspberry Pi board and Jetson board are not included in the package
- This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, for the previous Raspberry Pi OS (Legacy) users, contact us at sales@arducam.com.
Documentation
- Used on Raspberry Pi
- Used on Jetson Nano/Xavier NX
- 3D Drawing
- How to use the camera on NVIDIA Jetson Orin NX/AGX Orin
Video
Used on Raspberry Pi-Raspberry Pi Pan Tilt Zoom Camera Guide