Categories

Categorie
PrestaShop

Nuovi prodotti

Nuovi prodotti

Arducam 12MP IMX708 Fixed Focus HDR - RPI Camera V3

34,16 €
Tasse incluse
Quantità
Ultimi articoli in magazzino

Raspberry Pi Camera Module 3 is the latest camera module released by Raspberry Pi Official in 2023. Arducam has designed a Fixed-Focus camera variant based on it. The camera adopts a Sony 11.9MP IMX708 Image Sensor which can be used to take full HD video as well as still photographs and features an HDR mode of up to 3 megapixels.
The camera is equipped with a Fixed Focus Lens and integrated IR-cut filter which is more stable and fast when focusing compared with the Autofocus Lens. It is fully supported by the libcamera and Picamera2 library.
Arducam is committed to creating diverse and convenient camera solutions. Also, we designed various accessories for the Raspberry Pi Camera Module 3. Among them, include the Camera Extension solution, Quad-Vision stereo camera kit, UVC USB camera solution, and upcoming FPD-Link solution, etc. For details, please refer to our official website www.arducam.com


Applications

  • Wildlife Photograph
  • Machine Learning
  • High-Quality Monitor
  • AI applications
  • Vision Transition Project

Features

  • Complementary to RPI V3: A fixed focus supplement to the Raspberry Pi IMX708 autofocus camera module 3, catering to lots of use cases where auto-focus lenses are improper or unsafe.
  • Arducam Camera Module 3: Based on back-illuminated stacked CMOS 12-megapixel high-resolution Image Sensor (Sony IMX708) with HDR mode for up to the 3-megapixel output. Same basic functions as Raspberry Pi Official Camera Module 3.
  • Quality Images: Armed with a 66°(HFOV) fixed focus lens and the max resolution reaches 4608 × 2592. Compared to an autofocus lens, it realizes a faster-focusing speed hence stabler images. Along with built-in 2D DPC and QBC Re-mosaic function, offering a high signal-to-noise ratio (SNR). The high resolution and performance of the sensor enable the camera to capture ultra-high-quality images.
  • Native to Raspberry Pi: Natively supported by Raspberry Pi. No additional driver is needed when using the camera on Raspberry Pi. You only need to make some modifications in the config file. Supports Raspberry Pi Bullseye OS and libcamera command.
  • Platform Compatibility: Supports Raspberry Pi 3, 4 A/B, equipped with 15-22pin FPC flexible cable. Supports application on Raspberry Pi Zero (22-pin FFC flexible cable not included in the package).

Specifications

IMAGE SENSORIMX708
Resolution 11.9MP
Optical Size 1/2.43(7.4mm sensor diagonal)
Number of effective pixels 4608(H) × 2592(V)
Pixel Size 1.4μm × 1.4μm
Interface MIPI CSI-2 Interface
Shutter Type Rolling Shutter
Color Filter Color
Common Video Mode 1080p50, 720p100, 480p120
Output Format RAW10
F.NO F1.8
Focus Type Fixed Focus
Focal Length 4.74mm
Field of View(FOV) 75°(D)x66°(H)x41°(V)
IR Sensitivity Integral IR-cut Filter, visible light only
Camera Board Size 25 × 24 × 11.5mm

Package Including

  • 1 x Arducam 12MP IMX708 Fixed Focus camera module 3
  • 1 x 150mm 15pin-22pin FPC Cable

Notes

  • The package contains small contents, please keep it away from children to avoid accidental ingestion
  • After receiving the package, please confirm whether the contents of the package are consistent with the description
  • No Raspberry Pi board is included in the package
  • This camera is natively supported by Raspberry Pi, you don't need an additional driver to run it, but you will need some configuration, please refer to the following doc.

Documentation


Blog

AC-B0308
1 Articolo