The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print. Included in this combo-set is the all-new AMS lite which is elegant and reliable, making multicolor 3D printing accessible to everyone.

Highlights

• Plug-N-Play Convenience
• Active Flow Rate Compensation
• Full Auto Calibration
• Active Motor Noise Cancelling
• High-Speed Precision
• Active Flow Rate Compensation
• 180 x 180 x 180 mm Maximum Build Volume
• Includes AMS Lite
  
  

  Bambu Lab A1 Mini Combo

  The Bambu Lab A1 Mini 3D Printer is a game-changer in FDM 3D printing, redefining flow control. It utilizes a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print. Included in this combo-set is the all-new AMS lite which is elegant and reliable, making multicolor 3D printing accessible to everyone.

  Plug-N-Play

  The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.

  

  Full-Auto Calibration

  A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

  Auto Z-Offset

  A1 mini probes the bed with the nozzle to measure the absolute z-offset. No need to stick a paper as reference.

  Auto Vibration Calibration

  A1 mini has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.

  

  Auto Flow Dynamics

  First of its kind, A1 mini runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick & match involved, A1 mini handles Pressure Advanced calibration automatically.

  Auto Belt Tension

  A1 mini can check the belt tension automatically through the vibration frequency calibration. If the belt is loose, the HMS system will notify you to use the auto belt tensioner to set the belt to the right tension.

  

  Print Smooth At Every Corner, Always

  The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

  High-speed Precision

  Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

  

  Quick Swap Nozzles

  All-new quick swap hotend design, the hotend pops in and out with just 1 clip.

  Print Silently

  Active Motor Noise Canceling and Silent Mode can bring down the noise level to under 48 dB, making A1 mini one of the quietest 3D printers on the market, so you can take a nap while your printer is working hard.

  

  What's in the Box

  

  

  TECHNICAL SPECIFICATIONS
  Construction an Technical Details
  Usable Filament Diameter	1.75 mm
  Max Nozzle Temperature	300 ºC
  Open Filament System	Yes
  Recommended Printing Speed Max	500 mm/s (
  Build Area	180 mm x 180 mm x 180 mm
  Build Plate Temp Max	80 ºC
  Build Plate Surface	PEI
  Build Chamber During Process	Open
  Build Chamber Heated	No
  Filament Chamber Closed	No
  Extruder Number Of	1
  Installation Space / Requirements
  Total Mass Overall Dimensions	347 mm x 315 mm x 365 mm
  Total Weight	5.5 kg
  Max Power Consumption	150 W
  Voltage	AC: 100 V240 V (50-60 Hz)
  Equipment
  Emergency Shutdown	No
  Hepa Filter	No
  Door Sensor	No
  Door Lock During Print	No
  Filament Runout Sensor	Yes
  Filament Clogging Sensor	Yes
  Power Loss Fail Safe	Yes
  Touch Screen	Yes
  Camera	No
  Connection
  SD Card	No
  USB Port	No
  Ethernet Port	No
  WLAN	Yes
  Accuracy
  Shipping
  Shipping Box	385 mm x 430 mm x 430 mm
  Shipping Weight	8.2 kg