scuola-mepa
Flashforge Guider 3...The Flashforge Guider 3 Ultra surpasses its predecessors...
4.758,00 €
Prezzo
No products in the cart.
Assistenza
+39-06-45425958
Spedizione gratis
per ordini oltre €150
Nuovi prodotti
scuola-mepa
Zortrax M300 DualAre you a professional and have high demands on quality...
5.490,00 €
Prezzo
Infrared LED Board (B), Wide Field of View
Write your review
6,71 €
Tasse incluse
- 3W high-power 850 infrared LED
- Onboard photoresistor, the ambient light detector
- Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
- Allows adding night vision function to cameras which feature embedded infrared filter :
- 100 degree field of view, two pieces of LED is required to get wider field of view
- Supported devices : RPi Camera (E), RPi Camera (F), RPi Camera (H)
- Connect the Infrared LED Board to the camera PCB by screws
- The screw holes are used for both attachment and power supply
- Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically
- When ambient light is lower than threshold value, the infrared LED is on, vice versa
Note :
- Limited by the Raspberry Pi power supply, the 3W high-power infrared LED might cause the Pi to increase heating, heat sinks are suggested.
- Ideal imaging distance is within 3m. When the distance goes up to 6m, the night vision camera can just capture blurry outlines.
-
Weight: 0.021 kg
- Infrared LED Board (B) × 1 (Only 1 LED is included, it's recommended to buy 2 pieces when using with Raspberry Pi cameras, both the left and right sides)
- Screws × 2
VM-10670