- In saldo!
No products in the cart.
Assistenza
+39-06-45425958
Spedizione gratis
per ordini oltre €150
Foca Pro
Write your review
11,59 €
10,43 €
Risparmia 10%
Tasse incluse
Foca Pro
Foca Pro is a USB to serial UART board with XBee interface socket. It’s the essential tool for establishing communication between PC and mostly MCU or use XBee. Especially, it’s a optimum tool for some Arduino based boards without USB interface, like Sniffer Nano, Colorduino and etc.
Specification
| PCB size | 26mm X 49.6mm X 1.6mm |
| Voltage Input | 5V |
| Interface | UART |
| Indicator | PWR |
Features
- Single chip USB to asynchronous serial data transfer interface
- Entire USB protocol handled on the chip – No firmware programming require
- 5V Single Supply Operation and compatible with 3.3V/5V operation voltage
- USB 2.0 Full Speed compatible
- Compatible with Xbee
- Compatible with 2.00mm Grove Electronic Interface
Electronic Characteristics
| Min | Typical | Max | Unit | |
| Power Supply | 4.5 | 5 | 5.5 | VDC |
| Input voltage VinH(Target Voltage = 3.3V ) | 3 | 3.3 | 3.6 | V |
| Input voltage VinH(Target Voltage = 5V ) | 4.5 | 5 | 5.5 | V |
| Input voltage VinL | -0.3 | 0 | 0.5 | V |
| Current Consumption | - | 20 | 40 | mA |
Packing list
1*Foca Pro
Documents
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.
Technical support
For technical support, please open a ticket on Itead Support System
| Module Type | Adaptor |
|---|---|
| Weight | 12.00g |
| Model | IM141125006 |
| Board Size | 26mm X 49.6mm X 1.6mm |
| Version | 1.0 |
| Operation Level |
|
| Power Supply | USB 5V |
IT-IM141125006
1 Articolo
Foca Pro