The Sermoon M1 is one of the most powerful printers Creality has created. It´s a industrial grade, high temperature printer with a lot of useful functions.x

Highlights

• Double casing for best thermal insulation
• Water and air-cooled nozzles
• Dual temperature control system, real time monitoring of temperature
• Uniform results thanks to hot-air circulation
• High power heat bed that reaches 150° in just 3 minutes
• Power off delay
• Constant temperature in filament chamber
• Case cooling system
• Large display with intuitive GUI
  
  

• Creality Sermoon M1

  Double casing for best thermal insulation

  The whole printer has a double-layer casing which is very good for the thermal insulation effect.

  High power heat bed

  The heat bed is made from 6 mm aluminum. It can reach 150°C in just 3 minutes. The build platform is made crystal silicon glass with a nano-coating.

  Water cooling

  The cooling system works with both air and water. This provides the optimal cooling effect and makes sure that the temperature around the nozzle keeps at a steady temperature.

  Temperature system

  In the compartment for the filament the relative air humidity can be kept at 10-25% - this will ensure that the filament won’t be subjected to the damp air, which can result in failed prints and brittle filament.

  Dual heating systems

  The printer has a heated build chamber that can be set to 90°C. Thanks to infrared radiation and hot air circulation the heated chamber reaches temperature quick and provides the chamber with a “soft” heat that reaches every corner.

  Power off delay

  If there should be a power outage during printing the nozzle will automatically return to the X-axis zero before turning off the machine.

  Case cooling

  When printing with high-temperature materials, the top door cooling system can be activated. This system cools down the air between the two shells. This improves stability and service life of the equipment.

  Want to know more?

  See below for full description and specifications.

  

  TECHNICAL SPECIFICATIONS

   

  Construction an Technical Details
  Usable Filament Diameter	1.75 mm
  Max Nozzle Temperature	270 ºC
  Open Filament System	Yes
  Extruder Type	Bowden
  Recommended Printing Speed Max	100 mm/s (
  Build Area	400 mm x 450 mm x 500 mm
  Build Plate Temp Max	150 ºC
  Build Plate Material	Carbon crystal silicon glass plate
  Build Plate Attachment	clamp
  Build Chamber During Process	Open or Closed
  Build Chamber Heated	Yes, max 90°C
  Filament Chamber Closed	Yes
  Extruder Number Of	1
  Installation Space / Requirements
  Total Mass Overall Dimensions	1000 mm x 985 mm x 1335 mm
  Total Weight	300 kg
  Max Power Consumption	3500 W
  Voltage	AC: 100 V / 240 V
  	DC: 24 V
  Equipment
  Emergency Shutdown	Yes
  Hepa Filter	Yes
  Filament Runout Sensor	Yes
  Power Loss Fail Safe	Yes
  Touch Screen	Yes
  Connection
  SD Card	Yes
  USB Port	Yes
  Accuracy
  Layer Height	0.1 - 0.4 mm
  Resolution	0.1 mm
  Shipping
  Shipping Box	1300 mm x 1300 mm x 1500 mm
  Shipping Weight	330 kg