Categories

Categorie
PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti

ORTUR AUFERO LASER 2 - LASER ENGRAVING & CUTTING MACHINE - 10W

841,80 €
Tasse incluse
Quantità

A Lot Faster Than the Typical

32-Bit MCU on the 9th Generation Motherboard Stepper motor speeds can be increased from 4000mm/min to 10,000mm/min or even 15,000mm/min thanks to the ESP32 MCU's motion algorithm and a low center of gravity.

Easy and Fast Installation

Whether or not you have already used a laser engraving machine, this is the best high-performance machine for novices. The installation can be done in under 10 minutes.

10586__Ortur__004.jpg

Secure Design

A laser filter cover blocks 98 percent of the UV radiation. A light filter cover is attached to the laser head to keep animals from grabbing the laser spot. The laser will immediately shut off to prevent any harm if the machine is tilted or shifted, if the computer fails during engraving or if the motors stop moving.

Newest Compressed Focal Spot Laser Beam Innovations

Cutting depth of up to 12mm thick wood, 10mm acrylic, carving ceramics, and stainless steel can all be done with the latest Aufero Laser 2 5.5W high-compression focal point laser module diode.

10586__Ortur__005.jpg

LaserGRBL (Free) - Basic and Easy to use

Compatible with Windows from XP to W10 / Linux.Supports JPG / PNG / BMP / DXF / NC, etc.

LightBurn (Paid) - Advanced and highly customizable

Compatible with Windows from XP to W10 / Linux / Mac OS. Supports JPG / PNG / BMP / DXF / NC, etc.

10586__Ortur__003.jpg

PN-28746