- Nuovo
No products in the cart.
Assistenza
+39-06-45425958
Spedizione gratis
per ordini oltre €150
Polymaker PolyTerra PLA + - White 1Kg
Write your review
28,06 €
Tasse incluse
PLA+
PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
Recommended Settings
- Nozzle temperature: 190 – 220 ℃
- Build plate temperature: 30 - 60 ˚C
- Printing speed: 30 - 70 mm/s
- Build Surface Material: BuildTak®, Glass, Blue Tape
- Cooling Fan: ON
| Basic Data | |
| Material | PLA |
| Diameter | 1,75 mm |
| Weight | 1,00 kg |
| Length | 335 m |
| Color | White |
| Printing Parameter | |
| Recommended Min Print Temp | 190 ºC |
| Recommended Max Print Temp | 220 ºC |
| Recommended Min Bed Temp | 30 ºC |
| Recommended Max Bed Temp | 60 ºC |
| Recommended Min Print Speed | 30 mm/s |
| Recommended Max Print Speed | 70 mm/s |
| Recommended Retraction Min | 30 mm |
| Recommended Retraction Max | 60 mm |
| General | |
| Specific Gravity | 1,24 g/cm3 ISO 1183 |
| Temperature | |
| Vicat softening temp | 62 °C ISO 306 |
| Heat Deflection Temp | 56,2 °C ISO 75 |
| Flexural | |
| Flexural Strength | 49,5 MPa ISO 178 |
| Flexural Modulus | 2232 MPa ISO 178 |
PN-28602